Gcode printing file for Dental/Surgical Face Shield WITH Headlight (Massivit 1800 with UV Twin) > Download here
Print time: 13 mins
Weight: 136.94g

Gcode printing file for Dental/Surgical Face Shield WITHOUT Headlight (Massivit 1800 with UV Twin) > Download here
Print time: 11 mins
Weight: 126.84g

Even More Perks:
• Ability to adjust angle of loupes as required during procedures: move up or down
• Easy to sanitize between patients thanks to detachable Velcro strip
• Non-curved front transparent sheet to avoid distorted view
• Air outlet above frame to prevent fogging
• Flexible for almost any head size

[gkit id=9]

Disclaimer

The Massivit PPE Dental/Surgical Face Shields are made of polyacrylate for the frame, and 175 micron acetate for the shields. These shields are not medical masks and, if used without other protection, offer only a minimal physical barrier. Massivit makes no medical claims with regard to their usage and does not claim to be able to prevent the transmission of disease. Our shields are not FDA approved. Our shields are limited, handcrafted items and the company is not affiliated with any organizations, manufacturers, companies, or medical services.
As with all health considerations, if you are seeking a face shield to wear in relation to medical issues, please consult with a trusted medical professional to determine compatibility with your personal physical condition. These face shields do not come with filters or the option to insert filters. The face shields are not assembled in a sterile environment, however all possible precautions have been taken to prevent the spread of COVID-19 through social distancing and limited person-to-person contact outside of the immediate production facility. Gloves are worn during assembly, however cleaning of shields prior to any use is always recommended as an extra precaution.

The post Protective face shields for dentists and surgeons appeared first on Massivit.

Gcodes to be used with Massivit 1500 to print Door Opener Pedal > Download here
Gcodes to be used with Massivit 1500 to print Door Opener Base > Download here

Video

Original design by the Technion Faculty of Architecture & Planning and Design Tech.

Disclaimer

The Massivit Foot-Triggered Door Opener offer an alternative to opening doors with the use of hands, that may become contaminated.
Massivit makes no medical claims with regard to its usage and does not claim to be able to prevent the transmission of disease. The door opener is not FDA approved. It is a limited, handcrafted item and the company is not affiliated with any organizations, manufacturers, companies, or medical services.
As with all health considerations, if you are seeking equipment to prevent contamination of illnesses, please consult with trusted medical professionals. The door openers are not assembled in a sterile environment, however all possible precautions have been taken to prevent the spread of COVID-19 through social distancing and limited person-to-person contact outside of the immediate production facility. Gloves are worn during assembly, however cleaning of the door openers prior to any use is always recommended as an extra precaution.

The post Hands-free door opener appeared first on Massivit.

Printing data for 1 face shield: 12 minutes, 144.85 g.
Printing data for 10 face shields: 2 hours, 1.24 kg.

Original design by Twan Kerckhofs, ART Nzo.

Disclaimer

The Massivit 3D PPE Face Shields are made of polyacrylate for the frame, and 175 micron acetate for the shields. The face shield must not be used without the designated foam protectors attached to the frame.

These shields are not medical masks and, if used without other protection, offer only a minimal physical barrier. Massivit 3D makes no medical claims with regard to their usage and does not claim to be able to prevent the transmission of disease. Our shields are not FDA approved. Our shields are limited, handcrafted items and the company is not affiliated with any organizations, manufacturers, companies, or medical services.

As with all health considerations, if you are seeking a face shield to wear in relation to medical issues, please consult with a trusted medical professional to determine compatibility with your personal physical condition. These face shields do not come with filters or the option to insert filters. The face shields are not assembled in a sterile environment, however all possible precautions have been taken to prevent the spread of COVID-19 through social distancing and limited person-to-person contact outside of the immediate production facility. Gloves are worn during assembly, however cleaning of shields prior to any use is always recommended as an extra precaution.

The post Massivit 3d ppe face shield frames appeared first on Massivit.

The MTB is a large format, digital, hybrid, 3D printing system that shifts the paradigm for additive manufacturing by consolidating two technologies into one, using Massivit 3D’s Cast-In-Motion (CIM) process.

WHY MTB?

Large tools & molds traditionally used for producing fiber-reinforced composite parts are expensive, slow-to-build, wasteful, and require extensive, manual skilled labor. The MTB brings to market enormous time- and cost-saving benefits for the manufacturing of large tooling:

• Shorten production time of molds by 80%
• Save up to 90% of manual labor
• Significantly reduce tool costs
• Simplify production, achieve higher yield
• Simplify supply chain and reduce required stocks
• Reduce waste of expensive materials

How the MTB Solution Works

• The tool pattern is created with a sacrificial, UV-curable gel using Massivit 3D’s patented Gel Dispensing Technology (GDP).
• The desired tool is produced by casting any of a variety of dual-component thermoset engineering materials that closely match the mechanical and thermal process requirements.
• Once the 3D printed tool is immersed in water, the sacrificial pattern material breaks off, leaving the desired mold, ready to use.

TECHNICAL ADVANTAGES

• Design freedom allows mold production of function-oriented, intricate geometries
• Better and faster tool design cycle – including many features – reduces iterations
• Release production equipment increases overall capacity
• CAD part to CAD mold design enables improved accuracy, consistency and higher reliability
• Versatility and multiple casting materials optimize the use of the system

TECHNOLOGY

Massivit 3D’s disruptive, end-to-end tool & mold making solution comprises pioneering hardware, software and chemistry. It facilitates fast, efficient and waste-less manufacturing with unlimited size and volume capabilities. Massivit 3D’s technology is protected by a wide intellectual property portfolio containing 57 active patent assets.

MASSIVIT 3D

Massivit 3D Printing Technologies Ltd. (www.massivit3D.com) is a pioneer of large format 3D printing solutions comprising 3D printing systems, software, consumables, customer support, and professional services. Leveraging its proprietary Gel Dispensing Printing (GDP) technology, the company’s solutions enable the swift production of large format parts.
Massivit 3D’s initial portfolio of solutions were launched commercially in 2016. Founded in 2013 by a team of recognized industry experts, Massivit 3D is headquartered in Lod, Israel, and provides its worldwide community with end-to-end services supported through an extensive dealer network.

The post Massivit tool builder appeared first on Massivit.

September 6-8, 2019.

Come to meet us : Stand #C190, Hall #11

Be amazed by new 3D applications that are helping print shops take off with their business, raise their margins, and wow their clients:

• 3D/2D combined billboards and signage
• Eye-catching promotional 3D vehicles
• 3D Retail POPs and selfie points with illumination
• Innovative window displays
• Customized exhibition booths
• Custom-shaped, giant soft signage
• Cost-saving molds for thermoforming

The post Mediaexpo 2019, new delhi (india) appeared first on Massivit.

One-on-one meetings with Erez Zimerman are available during and after the conference (August 6th to August 8th) with prior notice by contacting Massivit 3D at isabelle.marelly@massivit.com.

About Massivit 3D

Massivit 3D Printing Technologies Ltd. (www.www.massivit3d.com) is a leading provider of large format 3D printing solutions. The company’s technology enables the creation of super-sized models and displays for a growing range of sectors including visual communication, exhibitions, entertainment, concept prototyping, and interior design. Massivit 3D’s proprietary Gel Dispensing Printing (GDP) technology leverages the company’s unique, instantly-curing printing gel, Dimengel, to quickly and cost-effectively produce lightweight, hollow 3D printed models up to 1.8m / 6ft high.

Founded in 2013 by a team of digital printing pioneers, Massivit 3D is headquartered in Lod, Israel, and serves customers worldwide with end-to-end services and through a well-distributed network of global resellers.

Download to PDF version

For more information, please contact:

The post Massivit 3d to present at jefferies 2019 global industrials conference on tuesday, august 6, 2019 appeared first on Massivit.

September 12-14, 2019.

Be amazed by new 3D applications that are helping print shops take off with their business, raise their margins, and wow their clients:

• 3D/2D combined billboards and signage
• Eye-catching promotional 3D vehicles
• 3D Retail POPs and selfie points with illumination
• Innovative window displays
• Customized exhibition booths
• Custom-shaped, giant soft signage
• Cost-saving molds for thermoforming

The post Igepa select 2019, ulm (germany) appeared first on Massivit.

by Takumi Yamamoto

Click here to download the Press Kit.

The post A portrait of db – press kit appeared first on Massivit.